The GVS Elipse SPM524 P3 replacement filters are designed to restore particulate protection in compatible high-efficiency Elipse combination masks. The pack contains one pair of filters without the corresponding retaining lids.
Key points
The pack contains one pair of replacement P3 particulate filters.
Replace worn, damaged or exhausted P3 filters, helping extend the usable life of the mask.
Provide the particulate filtration component in compatible combination configurations.
Intended to protect against particles, dusts, mists and fumes within the limitations of the P3 class and instructions for use.
Supplied without retaining lids.and so they require GVS SPM523 lids for correct installation on the compatible configuration.
Must not be used independently or with masks and configurations not declared compatible.
Replacement of P3 filters in compatible Elipse combination masks
Painting and surface preparation
Grinding and surface finishing
Metal cutting and processing
Welding involving fumes and particulates
Metal fabrication and machining
Industrial maintenance
Construction and building sites
Chemical industry
Agriculture and pesticide applications
Shipbuilding and repair
Environments involving dusts, mists and fumes covered by the P3 filter class
Product information
Brand: GVS
Product code: SPM524
Type: replacement particulate filters
Protection class: P3
Range: Elipse
Quantity: 1 pair
Configuration: filters without lids
Standard stated in the declaration of conformity: EN 143:2021
PPE category stated in the declaration of conformity: Category III
Contents and installation
P3 filters included: yes, 2
Retaining lids included: no
Required lids: GVS SPM523
Mask included: no
Gas filters included: no
Component type: replaceable consumable
Independent use: no
Verified compatibility
SPR495 S/M, SPR496 M/L; SPR490 S/M, SPR491 M/L; SPR498 S/M, SPR499 M/L; SPR493 S/M, SPR494 M/L; SPR511 S/M, SPR512 M/L; SPR514 S/M, SPR515 M/L; SPR517 S/M, SPR518 M/L; SPR487 S/M, SPR488 M/L; SPR466 S/M, SPR467 M/L; SPR481 S/M, SPR482 M/L
Related components
SPM523: pair of retaining lids for fitting the P3 filters
SPM524: pair of replacement P3 filters without lids
Notes
Use only with configurations declared compatible by GVS.
Check that the SPM523 lids are undamaged and hold the filters securely in position.
Replace both filters at the same time to maintain a consistent filtration configuration.
Overall protection depends on the mask, installed gas filters, correct assembly and operating conditions.
